Step 1 – The relation
The force is the pressure times the piston area, \(F = pA\) with \(A = \pi d^2/4\). It can be worked out in U.S. units and converted at the end, or converted first and worked out in SI. Both routes are shown; they must agree.
Step 2 – Route 1: U.S. units first
$$ A = \frac{\pi (4\ \text{in})^2}{4} = 12.566\ \text{in}^2, \qquad F = (3000\ \text{lbf/in}^2)(12.566\ \text{in}^2) = 37\,699\ \text{lbf} $$
$$ F = 37\,699\ \text{lbf} \times \frac{4.448222\ \text{N}}{1\ \text{lbf}} = 167\,690\ \text{N} = 167.7\ \text{kN} $$
Step 3 – Route 2: SI first
Convert the diameter and the pressure, then use \(1\ \text{MPa} = 1\ \text{N/mm}^2\):
$$ d = 4 \times 25.4 = 101.6\ \text{mm}, \qquad A = \frac{\pi (101.6\ \text{mm})^2}{4} = 8107\ \text{mm}^2 $$
$$ p = 3000\ \text{psi} \times 6.894757\ \frac{\text{kPa}}{\text{psi}} = 20\,684\ \text{kPa} = 20.68\ \text{N/mm}^2 $$
$$ F = (20.68\ \text{N/mm}^2)(8107\ \text{mm}^2) = 167\,700\ \text{N} $$
Step 4 – Check
The two routes give the same force. Note that the area factor is squared: \(1\ \text{in}^2 = 645.16\ \text{mm}^2\), not 25.4.
Answer: \(F = 167.7\ \text{kN}\).
Comments 0
Discuss the solution, ask for a hint or share another approach to this problem.
Join the discussion
Log in to comment, reply and vote.
No comments yet
Ask a question, share a tip or say thanks. Be the first!